Gotek, Cable, Premium Case Flash Floppy 3.25 Amiga 500 600 1200

This great set is designed especially for using Gotek Floppy Disk Emulator as additional Floppy Drive (DF1) and keep your original Floppy Drive (DF0).

Everything is prepared here and ready to go. All you need to do is connect your Gotek into your Amiga, connect USB Pendrive with games and copy 2 necessary files (USB pendrive not included).

Then download this software:

github.com/keirf/FlashFloppy/wiki/Downloads

and copy 2 files from archive into the root of your USB pendrive:

- HxC_Compat_Mode/Amiga/AUTOBOOT.HFE

- HxC_Compat_Mode/HXCSDFE.CFG

Then copy your *.adf games and programs anywhere in your USB Pen Drive.

Package included:

- Black Gotek Floppy Emulator already prepared for using with Amiga with Flash Floppy 3.33 firmware on it.

- Interface Cable Adapter

- Premium 3D Printed White Case

Compatible with:

- Amiga 500 (Boot selector is required, not included. See more details below)

- Amiga 500+

- Amiga 600

- Amiga 1200

You can boot from your Gotek external connected to Disk Drive connector from your Amiga 500+, 600, 1200. Simply please click right and left button mouse same time and in boot menu choose DF1. In Amiga 500 you can also use this external Gotek interface but then you will need a boot selector too which we also sell which can convert SEL0 and SEL1 signal and you can make your DF1 device bootable. Gotek Drive will be recognised as second Floppy Drive DF1 when connected to Disk Drive Connector and will be recocgnised as third DF2 and fourth DF3 when it is connectedto another external floppy drive.

You dont need 2 cables anymore (for data and power). Data signal and power connection are in one interface here.

Please note that you have to remove one screw from this Disk Drive port as DB25 was used for interface cable adapter with 2 PINs removed from DB25 connector (please see our photo on this listing which screw need to be removed from your Amiga).

Amiga computers from photos are not included.