Furia 68020 Rev3 FPU Amiga 600 Turbo Accelerator Card 9.5MB RAM

Active cooling already installed.

FuriaEC020 is an accelerator card for Amiga600 computers designed by Boris Krizma (Slovak Amiga HW developer) It's equipped with CPU Motorola MC68ec020/25 (OC33) MHz and FPU Motorola MC68882/40 MHz, and with onboard 9.5 megs of fast memory. The quick access to the memory makes this little card a real monster, as it makes the Amiga more than 10 times faster, than the original Amiga600.

The card has also ability to map rom into the fast ram, tested are roms 256 kB, 512 kB and also 1024 kB. The card also supports for Amiga600's IDE port speedup. The card is easily controlled by tool furiatune (written by Martin Kuchinka.To support inboard PCMCIA port, You need to remove 4 megs of the fast memory by 3 seconds press of Control+Amiga+Amiga.

Package included:

- Furia accelerator card - white PCB / Firmware 14.1/

- Active cooling fitted

- fitting poles included - may need lenght adjustment (sockets on Furia are heavy duty - different than other cards use, if you fit furia on cpu, you will be able to lift amiga holding furia in your fingers)

Disclaimer:

- in order to obtain highest compatibility, original CPU by Motorola and DRAM CHIPS were used. Chips are non produced nowadays but never used. Type used may vary. Every card is tested with MBR2 test for 2 hours with heastsing covered. Furia needs really fast Compact Flash card to work properly. Please, check AMSIDER device; fully compatible with FURIA and utilizing cheaper SD CARD

- new PCB version 3 REVISED - 2 mem chips

- new FIRMWARE 14.1

Features:

- CPU 68EC020/25 MHz (OC33)

- FPU 68882

- 9.5MB Fast RAM

- Maprom function

- PCMCIA friendly

- HIGHEST QUALITY PLCC bottom socket - stable and solid FIT (AMPHENOL) - high temp resistant