External mini floppy disk drive emulator V2.79 (electrically compatible with Gotek - adf files are loading from USB pendrive and it will work exaclty same way as any other gotek). It will work with all Amiga computers with back Disk Drive port. FlashFloppy firmware is preinstall on this emulator and ready to go out from the box.
Very compact size only: 63 xz 54 x 13 mm. There is an OLED display. It can work as DF1, DF2, DF3.
Emulator floppy disk drive emulator V2.79 need to be connected to the disk drive port on the back of your Amiga computer and it does not need additional power to work. It does not need any additional cable. It need to be connected when your Amiga is switched off.
Please note that cut DB25 connector was used in this project (pleasee see our photos).
Please click right and left mouse buttons same time when you switch on your Amiga and in boot menu choose DF1. In Amiga 500 you can also use this but then you will need a boot selector too which we also sell here which will convert SEL0 and SEL1 signal and you can make your DF1 device bootable.
All you need to do is connect your FDD V.2.79 emulator into your Amiga Disk Drive port, connect USB Pendrive formatted in FAT32 system fille (not included) with games and copy 2 necessary files (USB pendrive not included). You need to download this software: github.com/keirf/FlashFloppy/wiki/Downloads and copy 2 files from archive into the root of your USB pendrive:
- HxC_Compat_Mode/Amiga/AUTOBOOT.HFE
- HxC_Compat_Mode/HXCSDFE.CFG
Then copy your *.adf games and programs anywhere in your USB Pen Drive.
